Google Search

Wednesday, March 30, 2011

CHARACTERISTICS CURVES OF FRANCIS TURBINE


CHARACTERISTICS CURVES OF FRANCIS TURBINE


AIM:
To conduct load test on franchis turbine and to study the characteristics of francis turbine.
APPARATUS REQUIRED:
1.      Stop watch
2.      Tachometer
FORMULAE:
1. VENTURIMETER READING:
                       h  =  (p1 - p2) x 10                   (m)
Where
                         P1, p2- venturimeter readings in kg / cm2
           
2. DISCHARGE:
                        Q = 0.011 x Ö h                      (m3 / s)

3. BRAKE HORSEPOWER:
         BHP = p x D x N x T / 60 x 75    (h p)

   Where

  N = Speed of turbine in (rpm)
              D = Effective diameter of brake drum = 0.315m    
              T = torsion in [kg]

             4.  INDICATED HORSEPOWER:
                             HP = 1000 x Q x H  / 75                    (hp)                                                                                                
 Where
        H – total head in (m)
   5. PERCENTAGE EFFICIENCY:
%h = B.H.P x 100 / I.H.P                ( %)        
DESCRIPTION:

Modern Francis turbine in an inward mixed flow reaction turbine it is a medium head turbine. Hence it required medium quantity of water. The water under pressure from the penstock enters the squirrel casing. The casing completely surrounds the series of fixed vanes. The guides’ vanes direct the water on to the runner. The water enters the runner of the turbine in the dial direction at outlet and leaves in the axial direction at the inlet of the runner. Thus it is a mixed flow turbine.

PROCEDURE:

         1.The Francis turbine is started
         2. All the weights in the hanger are removed
         3.The pressure gauge reading is noted down and this is to be
             maintained constant  for different loads
         4. Pressure gauge reading is assended down
         5. The venturimeter reading and speed of turbine are noted down   
         6.The experiment is repeated for different loads and the reading are   tabulated.
  

GRAPHS : 
The following graphs are drawn
                  1.         BHP (vs.) IHP
2.         BHP (vs.) speed
3.                  BHP (vs.) % efficiency


RESULT :

          Thus the performance charactertics of the Francis wheel turbine are done and the maximum efficiency of the turbine is …………. %





h   %








I.H.P   hp





                                                                                                                                                                                                             Mean


B.H.P  hp






Discharge
Q x10-3
m3\sec






Tension
[T]
Kg






Spring
Balance
T2
Kg






Weigh of hanger
[T1]
kg






Speed of turbine
N
Rpm






Weight of hanger To
Kg






H= (P1-P2) x 10
m of water






Venturimeter reading
Kg\cm2

P2






P1






Total Head
[H]
m of water






Pressure
Gauge
Reading
[Hp]
Kg\cm2




H2






H1







S.no





2 comments:

Nur-E-Maksud Arafath said...

incredible......

seoaticoindia said...

atico export a francis turbine test bench manufacturer supplier exporter and provider in india.

Post a Comment